Head Office: 6E KCR Ind. Estate D12

Restaurant worker weighing food scraps

Restaurant Waste Audit: How to Run One in Ireland

How to run a restaurant waste audit in Ireland: what to measure, a one-week method, how to cost the waste, and the food waste rules to check against.

A restaurant waste audit is a week or two of weighing and recording what leaves your kitchen and dining room, bin by bin, so you know how much food, packaging and general waste you produce, where it comes from and what it costs. In Ireland you can start with your existing waste bills, add a simple weekly weighing routine, and put a euro figure on the avoidable part. This guide shows how, step by step, and what Irish rules to check the results against.

Compact
Turn Waste Audits Into Savings
Compact tailors waste audits to business needs, helping identify cost efficiencies and turn clean cardboard and plastic into revenue.

Explore waste audits

TL;DR

  • An audit has three jobs: measure each waste stream, find the source of avoidable waste, and put a cost on it.
  • Start with the last 12 months of waste bills, then weigh a representative week and multiply by 52 for an annual figure.
  • The EPA suggests €3,000 per tonne as an indicative purchase cost of avoidable food waste.
  • Since 1 July 2024 every commercial premises where food waste arises must segregate it at source, so your audit should confirm the brown bin is used properly.
  • We run free waste audits for Irish businesses and can turn clean cardboard and plastic into rebate income.

Table of Contents

What a restaurant waste audit tells you

The EPA’s food service pathway for Irish hospitality businesses describes the purpose plainly: estimate food waste in a consistent way, track performance and identify ways to reduce it. It can give you an annual estimate of food waste by bin type, show food ending up in the wrong bins, and estimate what the avoidable food cost you paid for.

That last point is where an audit earns its time. Waste is a cost you pay three times: once to buy the ingredients, once for the labour that handled them, and once more to have them collected. Wicklow County Council’s prevention guide breaks catering waste cost into exactly those parts: disposal, fresh food and staff time.

Three costs that food waste creates

An audit also covers more than food. Cardboard from deliveries, glass, plastic wrap and general waste all show up in your bills. A full audit looks at all of them, because the cheapest tonne to deal with is often the one you were paying to send to the wrong bin.

Know what you are checking against

Before you weigh anything, be clear on the legal baseline. Your audit should end with a yes or no on each of these.

For a fuller walk-through of the obligations, see our guide to food waste regulations in Ireland and packaging waste compliance.

Step 1: Start with the paperwork

You do not need to bin-dive on day one. The EPA pathway starts with what you already have. Collect the waste bills for the last year, check whether you are billed by lift or by weight, and ask your contractor for weight-based data. If you only have lift records, estimate a typical weight per lift for each bin type.

Build a simple sheet with one row per bin type:

Bin typeCollections per monthWeight per collectionMonthly cost
Brown bin (food waste)
Mixed general waste
Dry mixed recycling
Cardboard
Glass

Two things often surface straight away. Bins that are collected more often than they are full, and mixed waste bins that clearly contain food. Both are cost you can act on before you weigh a single bag.

If your building has shared or centralised waste services, the EPA notes that data may not be available at first. The ideal is a separate collection with dedicated reporting for your food service. Ask your landlord or managing agent about it early.

Step 2: Choose the categories to track

The EPA pathway points to three main bin groups: food waste (brown) bins, mixed general waste and recycling bins. Within food waste, the EPA’s research on full-service restaurants identifies three types: unserved waste, plate waste and preparation waste.

  • Preparation waste: trimmings, peelings, spoiled stock. Some is unavoidable, but the EPA notes that better preparation practice can reduce it, and that it tends to be high where most food is prepared on site.
  • Unserved waste: cooked but never sold. It is often low in made-to-order kitchens, but it still carries the full cost of buying, preparing and storing the food with no income.
  • Plate waste: what customers leave. Across full-service restaurants it averages 41% of total food waste, the largest share of avoidable food waste in the sector.

Add a reason code to each entry, such as overproduction, trim, spoilage, returned dish or portion size. The reason is what turns a weight into a decision.

Step 3: Weigh a representative week

The Wicklow guide’s method is simple enough for any kitchen: separate organic waste from general waste for a representative week, weigh the bin, subtract the bin’s own weight, then multiply the weekly figure by 52 for an annual estimate.

How to run the week:

  1. Pick a normal week. Avoid a bank holiday weekend or a private event unless that is your typical trade. If your business is seasonal, repeat the exercise in the other season.
  2. Set up separate containers. One each for preparation waste, unserved food and plate scrapings, plus the usual recycling and general waste bins. Label them clearly for staff.
  3. Put scales where the work happens. A platform scale by the pass and another at the bin store. Weigh the empty container once and write the figure on it.
  4. Log every weighing. Date, shift, container, net weight, reason code. One person owns the log each day.
  5. Record covers served. Waste per cover is the figure that lets you compare a quiet week with a busy one.
  6. Weigh the other streams. Cardboard, glass and general waste, so you can see the full picture. Our waste audit checklist lists what to record for each stream.

If you cannot weigh everything, the EPA also accepts visually checking the bins over a few weeks, or using default factors from national studies to assess mixed waste and recycling. Weight-based data remains the ideal.

Cold storage is a quiet source of spoilage. If walk-in and under-counter units drift out of temperature, stock is lost before it reaches the kitchen. Keeping refrigerator temperature records alongside your audit log helps you match spoilage entries to equipment problems.

Step 4: Turn weights into euros

Once you have a weekly total, the maths is short. Here is an illustrative example, not a benchmark for your site:

ItemFigure
Weekly food waste weighed85 kg
Annual estimate (× 52)4,420 kg (4.42 tonnes)
Indicative purchase cost at €3,000 per tonne€13,260

The €3,000 per tonne figure is the EPA pathway’s suggested multiplier for the indicative cost of purchasing the avoidable fraction. If you want a more precise figure, follow the Wicklow approach: take the average cost of ingredients from a sample of your invoices, add collection cost per kg times weight, and add an estimate of the staff time spent on food that is thrown out.

Then look at what the data says, in this order:

  • Which category is biggest by weight, and which by cost? A kilo of trimmed beef is not a kilo of potato peel.
  • Which reason code appears most?
  • Does waste per cover rise on particular days or shifts?
  • Is food turning up in the general waste bin?

The EPA stresses that you need to know what is coming from the business, where, and why before choosing any action. The audit gives you that.

Step 5: Act on what you find

Match each finding to a fix.

FindingTypical response
High plate wasteReview portion sizes, offer smaller portions, adjust sides
High preparation wasteReview knife skills, trim specifications and supplier formats
Unserved foodAdjust batch sizes and prep lists to forecast covers
Spoilage in storageRotate stock, check refrigeration, tighten ordering
Food in general wasteRe-train staff, label bins, move bins closer to prep stations
Bins collected half-emptyReduce collection frequency or bin size

For the food that cannot be avoided, Irish law needs it in a brown bin collected by an authorised operator. The EPA notes that a dedicated food waste service, used properly, gives accurate food waste information and lets the waste be used in the circular economy. If you are weighing options for treating food waste on site, read our guide to composting food waste in a restaurant and our range of organic waste composting machines. Wet waste is heavy, and our note on reducing wet waste weight explains how that affects cost.

Then track progress. The EPA recommends reviewing food waste quantities over time against business activity and the actions you took. Repeat a one-week audit every quarter, or after any menu change. Ireland’s national roadmap commits to a 50% cut in food waste by 2030, and customers and corporate clients increasingly ask about it. Businesses that want to go further can look at the EPA’s Food Waste Charter, a public commitment to measure and report on target-based actions.

The dry waste side of the audit

Restaurants, and the suppliers and kitchens behind them, produce a steady flow of cardboard and plastic film. Delivery boxes stack up fast, and loose cardboard fills bins, triggers extra lifts and costs money to move. Clean, baled cardboard has a market value instead.

Cardboard cartons and plastic film at receiving

If your audit shows cardboard is a large share of your bins, a cardboard baler or a cardboard compactor can cut the volume leaving your site, and our bale buyback scheme is built to turn that material into rebate income. Larger sites can also look at refurbished compactors and balers.

Our perspective

Most restaurants we visit are not short of effort. They are short of numbers. The kitchen knows it throws things out, but nobody can say how many kilos, from which station, or what it costs per month.

That is why we start every job with a waste audit built around the site’s real requirements, not a template. We look at the bills, the bins, the back door and the compliance position, then we show what can be saved and what can be earned.

Our view is that waste should be handled as one joined-up system. Food waste goes where the regulations require. Cardboard and plastic are baled clean and sold, so what used to be a disposal cost becomes a rebate. One team covers the audit, the equipment and the collection, so you are not coordinating several suppliers to get a single answer.

Do the audit once properly, repeat it each quarter, and let the numbers decide what you buy.

Graham

Get a free audit from our team

If you would rather not run the weighing yourself, we will audit your waste for you. We look at your streams, your compliance position and the options for equipment and recycling income, and tell you what we find.

Compact

Book your free waste audit or start from compact.ie to see everything we offer.

FAQ

How long should a restaurant waste audit last?

One representative week is enough to produce a usable annual estimate, since you multiply the weekly figure by 52. Seasonal businesses should repeat it in their other season. Quarterly re-checks show whether your changes are working.

Do I need special equipment?

No. Platform scales, labelled containers and a log sheet are enough. The EPA pathway is designed to use information you already have, such as waste bills and contractor reports, so you can begin before you buy anything.

The law requires you to segregate food waste at source and use an authorised collector, rather than to run a specific audit. An audit is the practical way to confirm you are meeting those requirements and to measure what the waste costs. See our guide to food waste regulations for the detail.

What should I do with the results?

Rank waste by cost, not only weight, then assign an owner and a target for each of the top three causes. Repeat the audit to check progress, and use the figures when deciding on bins, collections or equipment.

Sources

Share the Post: